How can we DIY on fabric/textile with dye sublimation ?

   

    Do you want to DIY your T-shirt?You can fulfill your desires with sublimation printing.How can we make dye sublimation on fabric/textile?
Preparation for Printing
   Design the image you want to print and prepare a garment.Check your printer options to ensure it is on the highest resolution or a photo-quality setting. Also, set the printer for "mirror mode," which reverses the image on the paper so that it will look right on the garment. Mark one side of a regular piece of paper with an X and print out a test so you know which side of the paper the printer will print on and whether the quality is sufficient.
Printing the Image
   Load the printer so that the blank-coated side of the transfer paper will receive the image. Most brands of transfer paper will have a red grid or similar warning on the reverse side of the paper to let you know that that side should not be printed on. Print your image onto the transfer paper, and then set it aside.
Working Place
   Prepare a flat, solid surface to transfer images that are not affected by heat. A large wooden or rigid plastic cutting board is a good choice on the top of the table or workbench.
Transfer the Image

   If your garment has wrinkles, use the iron to thoroughly remove them per the garment's care tag instructions. Then, pre-heat the iron for about five minutes on its maximum setting. While it heats up, trim away the excess transfer paper around the image using a pair of scissors. Get as close to the image as possible without cutting into it – usually within 3 to 4 millimeters. Next, place the image face down onto the garment where you want it to transfer. The heat should be at maximum. Apply the iron to the image and move it around as though you were ironing. Apply a generous amount of pressure; this is crucial for a proper transfer, including the elimination of air bubbles. Continue moving the iron around, ensuring each part of the image is in contact with the iron for up to 60 seconds.
Peeling Off the Paper
   Set the iron down, but leave it turned on. Allow the transfer paper to cool down for about five minutes or until it reaches room temperature. Then, stretch the garment a little and peel the paper off from one corner. The image should now be applied to the garment.
Finishing It Up
   Place a piece of reusable silicon paper over the image on the garment. Apply the hot iron to the paper and, using firm pressure, move the iron around the paper for 20 to 30 seconds. This will add longevity to the image – particularly in the laundry – by pressing it further into the garment. Remove the silicon paper, turn off the iron and enjoy your new garment!

   Do you like your new shirt?Follow us,share more fun DIY.

More info:
Website: www.skyimagepaper.com 
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com 
Tel: 86-025-86628894
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China