Many printers rely on the chip to identify the ink cartridges.Do you know how to replace the chips on ink cartridges?Here are some steps.
1.Turn off your printer.Remove the old ink cartridge from your printer.
Locate the smart chip, which will always be on the underside of the cartridge. You can achieve this by unloading the plastic labels fixed on the ink cartridge. Use sharp, thin tools to do this, such as Swiss Army knife or tool knife. Slide the knife blade under a plastic label. Gently pry up. Repeatedly delete other plastic labels.
2.Lift the ink chip from the cartridge.
3.The new chip is placed on two plastic sheets and is used to secure the chip to the cartridge. Gently press until the chip falls correctly under the label. You can use your tweezers.
4.Take a paper towel and lay it out on a flat surface, such as a table or desk. This is where you will be pouring the new ink into the empty ink cartridge. Place the empty cartridge on top of the paper towel, with the top of the cartridge facing up.
7.Insert the long needle that fills the ink bottle into the correct ink hole on the cartridge. Try not to cram any air into the cartridge when refueling. Very slowly and carefully, adding ink. Stop as soon as you see the ink coming out of the hole.
Locate the smart chip, which will always be on the underside of the cartridge. You can achieve this by unloading the plastic labels fixed on the ink cartridge. Use sharp, thin tools to do this, such as Swiss Army knife or tool knife. Slide the knife blade under a plastic label. Gently pry up. Repeatedly delete other plastic labels.
2.Lift the ink chip from the cartridge.3.The new chip is placed on two plastic sheets and is used to secure the chip to the cartridge. Gently press until the chip falls correctly under the label. You can use your tweezers.
4.Take a paper towel and lay it out on a flat surface, such as a table or desk. This is where you will be pouring the new ink into the empty ink cartridge. Place the empty cartridge on top of the paper towel, with the top of the cartridge facing up.
5.Read all the instructions in the manual included in your ink refill kit. Locate the fill holes on the top of your old cartridge. You can feel for the depressions by rubbing your finger across the top.
6.With a sharp tip, such as a needle or a fine pencil, pierce the fill hole-Check your fill manual, because some bulk ink cartridges will have more than one fill hole. The hole size should be minimal, and the size of the long needle is attached to the filling ink bottle.
7.Insert the long needle that fills the ink bottle into the correct ink hole on the cartridge. Try not to cram any air into the cartridge when refueling. Very slowly and carefully, adding ink. Stop as soon as you see the ink coming out of the hole.
8.Remove the needle completely.
9.Daub the top of the cartridge very lightly and carefully with the paper towel. A splotch of ink should leak out onto the paper towel.
10.Tape the hole with a small piece of clear tape. Before putting the cartridge back in, make sure that no ink is leaking out of the hole. Insert the cartridge back into the printer.
11.Turn on your inkjet printer. It should now be reading as having full ink.
I hope this document will be of some help to you. If you have other questions or suggestions, you can also contact us at any time.
More info:
Website: www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China
Website: www.skyimagepaper.com
Company Name: Fei Yue Digital Technology Co.,LTD
E-mail: sales@feiyuepaper.com
Tel: 86-025-86628894
Whatsapp: +86 18252072197
Address: Central Road 323, Nanjing, Jiangsu, China
评论
发表评论